Global Suppliers, delivering steel where and when you need it
  • Global Certificate: ISO 9001:2008
  • Language
Triton Alloys

S275JO High Yield Strength Round Bars

S275JO steel stockholders and suppliers, delivering to the whole of the India. We are suppliers of S355 grades in steel plate, round bar and flat bar. As an unalloyed low carbon steel grade S275JO is supplied in the hot rolled and cold drawn conditions. The S275JO steel specifications are high yield non alloy steels. First specified in the European EN10025 standard and later published by the British Standards Institute (BSI). These standards superseded the BS4360 grades. The average minimum yield for this material is 355 N/mm², hence the name S275JO(with the 'S' giving reference to it being a structural steel).

The purposes

  • To reduce slipping in concrete.
  • Increase the bond between the two materials, as reinforcing
  • They limit cracks in reinforced concrete due to stretching of bars.
The tensile stress on these bars is higher compared to the mild steel bars. We supply High Yield Deformed Bar with Grade 500 for the purpose of construction. These bars are produced in sizes ranging from 10mm to 40mm diameter.The steel bar weight is measured in metric tonnes, and we sell in bundle of 1 tonne each. It is often bent into the shapes required, but you cannot bend it below a certain minimum radius, otherwise it will crack or split. Steel bars that are used in reinforcing are also called as REBARS.

Why Deformed Bars

Using high yield deformed bar, with increased in yield strength allows engineers to use steel that is 1/2 or 1/3 the thickness and weight to do the same job. By switching to high yield, you have substantially reduced the weight of your product, which make transportation easier. In addition, the strength of bonds of deformed bars calculated should be 40% to 80% higher than that of plain round bars of same nominal size. High yield deformed bar is able to deflect more than mild steel before breaking but both materials deflect the same amount with respect to a given load.


Size: 1/2"NB TO 24"NB IN
Class: 150 LBS, 300 LBS
Materials: Monel :
Grade: Monel 400, Monel K500, Monel R-405
Nickel :
Grade: Nickel 200, Nickel 201
Inconel :
Grade: Inconel 600, Inconel 601, Inconel 625, Inconel 718
Incoloy :
Grade: Incoloy 800, Inconel 800H, 800HT
Hastalloy :
Grade: Hastalloy B2, Hastalloy B3, Hastalloy C22, Hastalloy C276, Hastalloy X
Titanium :
Grade: Gr1, Gr2, Gr3, Gr5, Gr7, Gr11
Stainless Steel :
Grade: ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 304H, 316H, 316/316L, 321, 330, 347, 309/S, 310/S, 317/L, 333, 410/S, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404
Carbon Steel :
Grade: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70
Duplex Steel:
Grade: ASTM / ASME A/SA 182 UNS F44, F45, F51, F53, F55, F60, F61
Alloy Steel:
Grade : ASTM SA 182 - E25, E26, E27, E28, E29B, E30B, E39B, E40B, E36B, E36C, E41B, AISI4130, AISI4140, AISI4340, 42CRMO4, 16MNCR5, 20MNCR5, 21CrMoV57, EN353, EN354, F11, F22, F91, F9, P11, P22, P91, P9, P5, P92, EN42J, EN8, EN19
Value Added Service: CNC Machine, Customized Flanges
SpecificationHY-80, MIL-S 16216-KHY-100, MIL-S 16216-K
Type of Steel Alloy Alloy
Requirements for Delivery A20 A20
Yield Strength (Min. ksi) 80/100 to 3/4" incl.; 100/120 to 3/4" incl.;
(Yield Point if 3/4" designated YP) 80/99.5 over 3/4" 100/115 over 3/4"
Spec. Thickness (Max. in.) 8 6
Chemical Composition% Carbon (Max.) .12/.18 to 1-1/4 incl.;
.13/.18 over 1-1/4"
.12/.18 to 1-1/4 incl.;
.14/.20 over 1-1/4"
Manganese .10/.40 .10/.40
Phosphorus (Max.) .015 .015
Sulphur (Max.) .008 .008
Silicon .15/.38 May be .08 Min. when vacuum carbon deoxidized .15/.38 May be .08 Min. when vacuum carbon deoxidized
Chromium 1.00/1.80 to 1-1/4" incl.; 1.40/1.80 over 1-1/4 - 3" incl.; 1.50/1.90 over 3" 1.00/1.80 to 1-1/4" incl.; 1.40/1.80 over 1-1/4 - 3" incl.; 1.50/1.90 over 3"
Nickel 2.00/3.25 to 1-1/4" incl.; 2.50/3.50 over 1-1/4 - 3" incl.; 3.00/3.50 over 3" 2.25/3.50 to 1-1/4" incl.; 2.75/3.50 over 1-1/4 - 3" incl.; 3.00/3.50 over 3"
Molybdenum .20/.60 to 1-1/4"; .35/.60 over 1-1/4 - 3" incl.; .50/.65 over 3" .20/.60 to 1-1/4"; .35/.60 over 1-1/4 - 3" incl.; .50/.65 over 3"
Copper .25 .25
Other Elements .02 Ti
.03 V
.02 Ti
.03 V
Heat Treatment Required Q&T Q&T

Products List